Logiphase® EMS
See where every kilowatt goes
Energy monitoring across sites, lines and analyzers: live consumption and power quality, reactive penalties, peak demand, cost and carbon, on one platform.
Turn every meter into insight you can act on
Logiphase reads your analyzers in real time and brings consumption, power quality and costs together on the screens your energy team uses every day.
- 1
See the whole site in one dashboard
Total active power, imported active and reactive energy, the top consumers, per-phase voltage and current and live power curves for every analyzer, with alarms and sustainability figures beside them.
- Active · reactive · apparent power
- Top consumers
- Voltage & current
- Alarms
- 2
Every analyzer at a glance
Each meter has its own live card with its active power and the three phases, so a feeder that is overloaded, unbalanced or offline stands out immediately.
- Live per analyzer
- Phase A · B · C
- Online / offline
- 3
Your energy system as live screens
Single-line diagrams of substations, EV charging hubs with load management and renewable plants are drawn from a ready symbol library and run on live data.
- Single-line diagram
- EV charging
- Solar · wind · battery
- Symbol library
- 4
Know every connection is alive
The line diagram shows each gateway and switch with the analyzers behind it. Healthy links pulse with data and a meter that stops answering turns red.
- Gateways & switches
- Communication status
- Modbus TCP
- 5
Stay clear of reactive penalties
Reactive watch puts the inductive and capacitive ratio of every analyzer against its limit, and sorts them into normal, early warning and penalty limit before the bill arrives.
- Inductive · capacitive
- Early warning
- Penalty limit
- 6
Compare consumers side by side
Benchmark ranks analyzers by energy, power or power quality, shows each one’s share of the total and marks the ones outside the limits. The table exports to CSV.
- Energy · power · quality
- Ranking & share
- Limit compliance
- CSV export
Key features
Keep reactive energy under the penalty limit
Logiphase follows the inductive and capacitive ratio of every analyzer through the period, warns early and shows whether the compensation is keeping up.
Stay under the contracted power
The 15-minute demand window is projected as it fills. When it heads over the contract, Logiphase sheds loads to keep the peak under the limit.
Projected demand stays under the contracted power.
See energy as money and carbon
Imported energy is turned into unit cost, CO₂ emissions and everyday equivalents, so savings can be reported to finance and sustainability teams alike.
Watch any value move, live or from history
Pick values from any analyzers and follow them together on one chart. Switch between line, area, bar, pie and box plot views and change the time scale as you go.
Frequently Asked Questions
Logiphase EMS is an energy monitoring system. It reads meters and network analyzers in real time and shows consumption, power, power quality, reactive energy and costs for every site, line and device on one platform, on web and mobile.